The Anker Soundcore VR P10 are Winning Gaming and VR Earbuds

Anker Soundercore VR P10 headphones

Photo: Mark Knapp/Gizmodo

Although the market for wireless gaming headphones is very small, it got a little bigger with the addition of Anker Soundcore VR P10. These headphones have a lot in common with Bluetooth options you’ll find on the market, but they carry the friendlier price tag of Anker’s other Soundcore products ($100 MSRP, but $80 at the time of writing). ), they offer an attractive feature of wireless music equipment: dedicated wireless transmission. While they may not be perfect products, they offer so much at such a low price that their value makes them a worthwhile product for those looking for reliable audio. ‘everywhere they go and can’t always carry one pair of headphones. .

A unique pair of ears with a prominent shape

Anker’s Soundcore brand has a wide selection of Bluetooth headphones, but they often have features that compete with more expensive headphones. So, it’s not surprising to see the P10 VR buds coming in at the lowest price for any wireless gaming headset, let alone those that offer two different ways to connect. While the shape of the VR P10’s earbuds sets them apart from some of Anker’s other offerings, the buds themselves have a similar shape to some of Soundcore’s other Liberty earbuds, albeit with a slightly shorter design. and the souter and the fireplace – these are for the game, after all.

Anker Soundercore VR P10 headphones

Photo: Mark Knapp/Gizmodo

Clean layout and elegant design

The Soundcore VR P10 headphones come in a small case like most headphones. The case is as funny as the robot that came out of it Portal game system, and a small round eye on the front that lights up when the case is opened. That little eye also works as a low battery indicator. The case opens easily, but it also appears to open quickly when dropped. USB-C charging is almost always offered, the case has it, although it doesn’t offer wireless charging like some other options do.

Inside the case is where Anker scores high. Many wireless gaming devices commit the sin of not having anywhere to store the wireless media and the device. That is a recipe for failure. Despite the limited space of the VR P10 case, Anker found a suitable space with the dongle. It is held in the top cover with a strong magnet. That said, the magnet is almost as strong, and the dongle is quite soft, sometimes making it difficult to remove the dongle. Anker may even include instructions on how to remove the dongle from its kit, although that doesn’t indicate the easiest way to remove the buds.

The Buds offer a run time of 6 hours streaming, while the case carries an 18 hour charge which is thought to add up to give a combined 24 hours of battery life.

Buds are in-ear models, plugging directly into the ear canal with silicone tips. Anker includes 3 different sizes in the box. Buds combine white and silver colors for a soft and beautiful appearance. Three pieces on the stem (like the Adidas logo) give a little light, although it is only orange, pink, blue, or two shades of purple. As is common among Soundcore buds, the VR P10 offers touch controls on each knob. Despite the snug fit, they don’t hold in my ears like other buds, and they always fall out during exercise.

Ready, set, go

The VR P10 can work just like your typical Bluetooth headset. You put them in pairing mode using the button on the back of the bag, then search for them in your phone’s Bluetooth settings. But the main feature is the buds support for dedicated wireless transmission.

The transmitter is a compact USB-C dongle that also has a USB-C port on it. This additional port is to allow for a quick charger. While the Soundcore VR P10, as the name suggests, is intended for use with Meta Quest 2, the dongle supports the connection of PC, PS5, PS4 (with a USB adapter), Nintendo Switch, and others. Overcharging has a limited capacity, though. While it was enough to keep the Quest 2 powered, it only left enough juice in my laptop (which uses a 65W charger) to charge it when it was low, and it saw the battery drain slowly. run to run demo. high brightness level and video calling. The link does not support data transmission, although VR Link users can connect the dongle to their computer, and connect their VR headset to their computer separately.

Anyone who hates shuffling dongles between devices will be able to purchase multiple dongles for the VR P10. It is possible to switch connections to different dongles through the Soundcore app.

Anker Soundercore VR P10 headphones

Photo: Mark Knapp/Gizmodo

New links

The VR P10 is one of the first audio devices on the market to offer Bluetooth LE has the new LC3 codec. Curiously, LC3 is only used in dongles, while standard Bluetooth connections will use either SBC or AAC codecs. The dongle connection provides clean audio with minimal visual distortion and low latency which is great for gaming. Bluetooth connectivity, stuck with weak codecs, isn’t good for anything more than podcasts, audiobooks and some casual music.

I’ve seen some amazing bonding behavior from the buds. One intended but bad behavior: any sound from the Bluetooth connection will destroy the dongle connection, even the phone’s unlocking noise, and it will take a few seconds to return to the wireless dongle signal, disrupting any game. experience comes from the dongle. Buds support audio streaming at the same time if the Bluetooth source is a voice call (including Discord), but the balance of the voice can be small, and the quality of the audio falls in the process.

The other issue happened on several different occasions. If I change the volume on my computer when it is connected using a dongle, it can block any kind of playback – cut off the audio from Winamp and or completely hot music on YouTube, need to refresh the tab. It’s an amazing feeling that I can’t blame on the headphones, but also what I only got with these two.

It’s good, but not great audio

The Anker Soundcore VR P10 headphones do something special, but nothing magical. The truth of the earbuds is that their audio quality falls within the acceptable safety margin. They put a little more power in the bass, with a great mid and treble mix.

Listen to Montreal Lack of Fear, the hard-hitting Ear Bird continues the album’s high energy. In the opening track, the bass line comes in and out, and every time it comes in, the rest of the song loses some of its rhythm. Bass feels heavy, but because the high end ends, some quality of even the bass signal is lost. Even when the bass is turned off, the mids and treble are not limited.

On the plus side, the dongle connection avoids any glaring compression issues that I encounter with basic Bluetooth connections. Even during the most chaotic of Montreal or Wakusei Abnormal tracks, I didn’t notice any audio degradation.

The lack of balance and EQ makes the buds not ideal for competitive gaming, where split second decision making and the ability to pick up any sound cues in your environment is critical. I played many hours of Overwatch 2 wearing buds, and I do not find myself listening to everything that happens as I usually do with over-the-ear headphones. But I found them to be enough to see around me while I played Assassin’s Creed Valhallaand they work seamlessly with Quest 2 to have great puzzles and soundtracks. The Last Clockwinder.

The earbuds do not have much sound isolation, allowing ambient sound to fall in. It is not enough to distract from many experiences, especially since the buds can have many sounds, but it makes them not good for listening to content when out of the environment. In fact, it makes them a little more wearable when playing in VR.

Anker Soundercore VR P10 headphones

Photo: Mark Knapp/Gizmodo

The earphones go only

The microphone in the Buds VR P10 performs well in a small, quiet room. They pick up my voice well with enough clarity to produce what I am saying clearly. However, other than that, they don’t offer much to be happy about. In a large room, the microphones do not raise the volume, because they are able to collect echoes.

They don’t have any fullness, but they don’t have nearly the same clarity that a well-placed boom mic can provide. They also do little to reduce the vibration of my keyboard or mouse when I play games. Although they do cut out some background noise, as a regular runner, the noise blends in with my voice when I’m talking.

Although these weaknesses are common among earbuds, it is still worth considering if you plan to use the buds for more than casual gaming.

The application is simple and effective

The Soundcore app controls the buds and includes controls for changing lighting effects and colors, changing dongle connections, adding custom EQ, changing touch controls, updating apps, and turning on Super Hearing, Sports and Speech, and the microphone. Super Hearing is designed to pick up gunshots and footsteps in FPS games where gaming and talking is a feature that allows simultaneous audio through games and voice calls. The application is simple but intuitive, and thankfully it does not require a user account to use.

Anker Soundercore VR P10 headphones

Photo: Mark Knapp/Gizmodo

Should I get the Anker Soundcore VR P10?

The P10 VR headsets don’t produce killer audio, but they do deliver killer value. For that price, you get a Bluetooth headset and a wireless gaming headset in one. The headphones are easy to listen to in terms of mic and audio quality, but the VR P10 buds offer wider support and better quality than I expected for the price. And when they’re reduced to $80, they’re a real steal. I wouldn’t recommend them if audio quality is your priority. But if you know you want a gaming headset, these are the ones to get.


Also Read :  Shonda Rhimes, other creators unhappy with Netflix's new mid-video ads

Leave a Reply

Your email address will not be published.

Related Articles

Back to top button